Home > Products > 32-bit Microprocessors

32-bit Microprocessors

V1 ColdFire® 32-bit Processor from Freescale provides high performance, low power, low gate count (40K gates), and low cost, and boasts complete hardware development and software tool ecosystems.  The V1 ColdFire microprocessor includes an industry standard AMBA AHB interface, optional MAC and hardware divide units to accelerate DSP operations, and an on-chip single pin debug unit for application software debug. 

V1 ColdFire® Processor for Altera from Freescale is available free-of-charge from IPextreme, is the same V1 ColdFire® processor core implemented in Freescale’s MCF51QExx devices, but delivered to you as an SOPC Builder-ready design, optimized for the Altera Cyclone® III FPGA.

V2 ColdFire® 32-bit Processor from Freescale has the same architecture as the V1 ColdFire but also includes a cache memory controller and dedicated interfaces for ROM, SRAM, and an instruction, data, or unified cache.   The V2 ColdFire also has a higher performance MAC than the V1 ColdFire to further accelerate DSP operations, and an on-chip debug unit.

V2 ColdFire Standard Product Platform (SPP) takes you a step further toward building a complete SoC by pre-integrating the V2 ColdFire Microprocessor with a complete set of peripherals.  The V2 ColdFire SPP includes a Multi-AHB crossbar switch, 10/100 Ethernet controller, QSPI, I2C, DMA controller, 3 UARTs, 4 Timers, Interrupt Controller, Watchdog Timer, and clock disable control for peripherals.

Power Architecture e200z1 32-bit Microprocessor from Freescale is ideal for cost-sensitive applications that require an MMU but do not need enhanced DSP support.  The e200z1 offers a 4-stage pipeline, 8-entry MMU, single cycle execution for most instruction, a branch prediction unit, and Nexus5001 class 1 debug support.  The e200z1 also has a native AMBA 2 AHB interface for easy integration with AMBA based peripherals.

Power Architecture e200z6 32-bit Microprocessor from Freescale is the high-end member of the e200 microprocessor family.  The e200z6 offers a 7-stage pipeline, SIMD and FPU units to eliminate the need for a separate DSP, 32-entry MMU, unified 32-KB, 8-way set-associative cache, branch prediction, and Nexus5001 class 3 debug support. The e200z6 also has a native AMBA 2 AHB interface for easy integration with AMBA based peripherals.

 

cs

The following Microprocessors are available for purchase online:

V1 ColdFire® 32-bit Processor from Freescale provides high performance, low power, low gate count (40K gates), and low cost, and boasts complete hardware development and software tool ecosystems.  The V1 ColdFire microprocessor includes an industry standard AMBA AHB interface, optional MAC and hardware divide units to accelerate DSP operations, and an on-chip single pin debug unit for application software debug. 

V1 ColdFire® Processor for Altera from Freescale is available free-of-charge from IPextreme, is the same V1 ColdFire® processor core implemented in Freescale’s MCF51QExx devices, but delivered to you as an SOPC Builder-ready design, optimized for the Altera Cyclone® III FPGA.

HCS08 Processor from Freescale is a state-of-the-art, high performance, low-power processor.  The HCS08 is in production in hundreds of millions of and thousands of embedded systems are utilizing it.